Lexicon PCM 91, User Manual

Page: 33 / 163

2-11
Basic Operation
2.2 Format
This control allows you to format a Memory Card for PCM 91 use. (Make sure
the Write Protect switch on the card is set to Off.) Insert an unformatted card (or
one you don't mind erasing), then press Store. The display will ask "Are you
sure?" (Press STORE). Press Store. The following display will appear briefly.
The display will then change as shown below.
A blinking cursor indicates that a particular character is available for changing.
Use ADJUST to select the character you want in that position. Turn SELECT to
move the cursor to another character. Press Store to execute. The display will
ask "Are you sure?" (Press STORE). Press Store again to complete the
operation. Press any front panel button to cancel.
2.3 Name
This control allows you to rename a formatted card. Insert a formatted card and
press Store. The card name will be displayed with the blinking cursor as shown
above. Use ADJUST to select a new character at the location marked by the
cursor. Turn SELECT to move the cursor to another position. Press Store twice
to execute.
2.4 Labels
This control allows you to rename Register bank and row labels. Any changes
made here are executed immediately. To rename bank and row labels, press
Store and use ADJUST to display any bank. Press Load/
✱
to access the naming
function for the selected bank, then use ADJUST and SELECT to enter a new
bank name.
Press Load/
✱
to display the first row in the selected bank. Use ADJUST to select
any other row within the bank. Press Load/
✱
to access the naming function for
any displayed row, then use ADJUST and SELECT to enter a new bank name.
Pressing Load/
✱
from the row label naming display will jump you back to bank
selection.
Format and name
memory card
Name: New Card
(press STORE)
This display allows you to assign a name (of 10 characters or less) to the card.
PCM 91 Character Set
! “ # $ % & ‘ ( ) * + , - . / 0 1 2 3 4 5
6 7 8 9 : ; < = > ? @ A B C D E F G
H I J K L M N O P Q R S T U V W
X Y Z [ ¥ ] ^ _ ‘ a b c d e f g h i j k l
m n o p q r s t u v w x y z { : } ~
❚
(space)
The @ and the $ symbols are used to
represent Custom Control values.