Lexicon PCM 91 User Manual Download Page 139

Page: 139 / 163

4-39

The Presets

P7 Post cont'd.

0.8

Close/Closet

ADJUST:

Blend

Keywords: Dialog, Small, Room, Splits

Very small environment effects with very little reverb

0.9

Coffin>Heavn

ADJUST:

Blend

Keywords: Chamber, Room, Large, Cascade

A small, muffled environment with little high-end or low-end response and a very large,
diffuse space with better high-end response.

Medium Spaces

1.0

Garage A+B

ADJUST:

Blend

Keywords: Indoor, Mono, Room, Splits

This Mono Split preset recreates the spatial characteristics of a garage. ADJUST
increases and decreases the size of the garage.

1.1

Locker/Booth

ADJUST:

Blend

Keywords: Dialog, Chamber, Medium, Splits

A locker room effect with reflections and a booth effect which is very dry and tight.

1.2

Garage/Booth

ADJUST:

Blend

Keywords: Chamber, Gated, Large, Splits

A large empty garage effect with ADJUST controlling the size of the space from large
down to the size of a booth.

1.3

Class/LoGate

ADJUST:

Blend

Keywords: Chamber, Dialog, Gated, Splits

The dry reverb characteristics of a classroom adjustable to a bassy gated effect which
puts the sound source off to a distance.

1.4

Studio/Gate

ADJUST:

Blend

Keywords: Chamber, Dialog, Gated, Splits

Typical dry studio environment adjustable to a good sounding gate.

1.5

Farm Rooms

ADJUST:

Blend

Keywords: Indoor, Natural, Small, Splits

With ADJUST turned hard left, the rooms are moderate size. As you turn the knob to the
right, the rooms get smaller with less and less reverb.

1.6

Barns

ADJUST:

Blend

Keywords: Indoor, Room, Splits

Two chamber rooms, one emulating a big wooden barn with haystacks to absorb the
sound, and a metal barn with a brighter, tinnier sound.

1.7

Medium Rooms

ADJUST:

Blend

Keywords: Room, Medium, Splits

A room similar to the classic PCM 70 Medium Room. ADJUST turns it into a grainy,
abnormal room.

1.8

Room>Smooth

ADJUST:

Smoothness

Keywords: Chamber, Room, Medium, Cascade

Two chambers, a bright, small room with a short Mid RT and a very large, diffuse chamber
with less high-end response. ADJUST toggles the two.

1.9

Store>Wrhrse

ADJUST:

Blend

Keywords: Chamber, Room, Indoor, Cascade

A medium size, unmuffled chamber and a large, diffuse chamber with a high shape
setting. ADJUST adds the second chamber.

Summary of Contents for PCM 91




































































































































































Search results

Summary of Contents for PCM 91

Reviews:

Related manuals for PCM 91

Brands by name

Popular brands

Lexicon PCM 91, User Manual

Search results

Summary of Contents for PCM 91

Reviews:

Related manuals for PCM 91

Brands by name

Popular brands