manualshive.com logo in svg

Lexicon MX500, Owner'S Manual, Page: 52 / 68

Share
Download
Lexicon MX500 Owner'S Manual Download Page 52

reverB/effect SelectIon ButtonS

Reverb/Effect Selection Buttons

To change a reverb or effect in Processor A or Processor B, left click on the 

Reverb/

Effect Select 

button in Effect 1 or Effect 2 control area.  A list of the MX500’s reverbs 

and effects appears, with a check mark next to the currently selected reverb or effect. 
Highlight an item in the list and left click to select and load it. Notice that the reverb 
or effect name now appears in the 

Reverb/Effect Select 

button, and the Parameter 

knobs in MX-Edit change position, layout, and number, depending on the default val-
ues for the selected reverb or effect.

ConTrols

To make editing in MX-Edit easy and intuitive, there are three ways to adjust knobs in 
MX-Edit:

Mouse - Circular

Place the cursor at the outer (shadowed) edge of a knob, then click and hold the left 
mouse button. The white indicator line on the knob jumps to the mouse cursor’s 
position, and follows the cursor as it moves around the circumference of the knob. 
To make fine adjustments, continue to hold the left mouse button down and move 
the cursor away from the knob; the white line still follows the cursor, no matter how 
far away it is from the knob. (Note that this control does not apply to Macs; hold the 
Option key to make fine adjustments.)

Mouse – Up / Down

Move the mouse cursor to the center of a knob; the knob is highlighted, and the cur-
sor changes to a double-headed arrow, pointing up and down. Click and hold the left 
mouse button, causing the cursor to disappear. Move the mouse up to turn the knob 
higher, or move the mouse down to turn the knob lower. For very fast edits, press and 
hold the Ctrl key on your computer keyboard while moving the mouse; this multiplies 
the adjusted value by a factor of 10 (Windows

®

 only). 

Arrow Keys

Highlight, then left-click on a knob to select it. Use the up (or right) arrow key to turn 
the knob higher and increase the value; use the down (or left) arrow key to turn the 
knob lower, decreasing the value. This is a very effective method for making small 
adjustments to fine-tune your settings. For faster modifications, press and hold the Ctrl 
key on your computer keyboard while pressing an arrow key to multiply each adjust-
ment by a factor of 10 (Windows only).

46

The MX-Edit

TM

 Editor/Librarian 

Summary of Contents for MX500





































































Reviews:

No comments