Lexicon MX500, Owner'S Manual

Page: 21 / 68

Using the MX500
15
Knob B
to change the case of the character.
3. When you finish changing the name, press the
Store
button again and the
"Location to Store Over" screen appears. Use the
Page/Select
knob to select the
new user program location you want to store/copy the changes to.
4. Press the
Store
button again to complete the procedure.
edItIng a Program
Once a program has been loaded, you may find you want to make adjustments to it for
your particular application. Editing of programs is done using the
Page/Select
and
three
Edit Knobs
(
A
,
B
, and
C
) to the right of the
Main Display
. Each effect can
be edited independently by selecting it with the
Page/Select
knob. As the effect is
selected, its name is highlighted in the
Main Display
and three parameters become
visible for the effect at the bottom of the
Main Display
. The
Edit Knobs
can then
modify these three top level parameters.
(Fig. A)
Note
: Dual Stereo programs feature a slightly different Program Screen which dis-
plays both program names. When
Edit Knobs A
,
B
, and
C
are turned, the three
parameters of the selected effect will be displayed momentarily for editing purposes and
then the name of the second program will reappear. (Fig. B shows Tape Delay as the
selected effect in a Dual Stereo Configuration program).
(Fig. B)
Edit Knobs A
,
B
, and
C
will modify the Tape Delay effect’s Tempo, Delay Time, and
Feedback parameters respectively. In addition, Surround and Stereo Configuration
program effects have several other parameters that can be modified from the
Edit
Effect
menus.
MX500