Lexicon
MPX R1 User Guide
4-2
MIDI System Channel Assign
Default:
1
Assigns the MIDI transmit channel (1-16) for all buttons (except TOE).
MIDI Internal Pedal Channel Assign
Default:
1
Assigns the MIDI transmit channel (1-16) for the onboard foot pedal.
MIDI External Pedal Channel Assign
Default:
1
Assigns the MIDI transmit channel (1-16) for the external foot pedal/Analog
controller.
MIDI Toe Channel Assign
Default:
1
Assigns the MIDI transmit channel (1-16) for the Toe switch.
External Foot Switch #1 State Select
Default:
2
Selects the foot switch state (Latching=1 or Momentary=2) for external foot
switch #1. This allows a momentary foot switch to act like a latching foot switch.
For momentary foot switches, leave this at the default setting (2).
External Foot Switch #2 State Select
Default:
2
Selects the foot switch state (Latching=1 or Momentary=2) for external foot
switch #2. This allows amomentary foot switch to act like a latching foot switch.
For momentary foot switches, leave this at the default setting (2).
External Foot Switch #3 State Select
Default:
2
Selects the foot switch state (Latching=1 or Momentary=2) for external foot
switch #3. This allows a momentary foot switch to act like a latching foot switch.
For momentary foot switches, leave this at the default setting (2).
MIDI Clock Output On/Off
Default:
Off
Specifies the source of MIDI clock output. Settings include: Off, On (generate
internally), re (merge from remote in), in (merge from MIDI in).
Program Load mode
Default:
3
Determines how program numbers are entered. Two states (indicated below by
a /, indicates a second mode is available by pressing and holding down the FX
button.(In the second mode, the FX light blinks.)
1 = Banks
2 = Direct Access Mode
3 = Banks/Direct Access
4 = Banks/Direct Device
5 = Setup/Direct Access
6 = Setup/Direct Device
Redundant Program Change On/Off
Default:
On
When set to On (the default), the remote will send a redundant program change
message. (If you select the same program number (0-9) as the program that is
loaded, the remote will send that program change.) When set to Off, the remote
will not send a new program change if the program corresponding to the number
selected is already loaded.
Edit Mode
Program Parameters
1
2
3
4
5
6
7
8
9
10
