6-2
Lexicon
MPX R1 User Guide
Reinitialization
Press System.
Press > repeatedly to
get to the MPX 1/
MPX R1 selection.
Press the flashing Store button
to reinitialize the MPX 1 for use
with the foot controller.
On the MPX R1, press the 0 (ON/OFF 4) button while powering up. When all of
the LEDs begin blinking, release the 0 button and press FX to initialize the foot
controller. (Press any other button to cancel the initialization procedure.) This
will reset all of the MPX R1 parameters to the default states listed in Chapter 4.
On the MPX 1, press System and turn the knob to select Initialize. Press the
> button repeatedly to step to the last selection in the Initialize menu: MPX 1/
MPX R1. The Store button will flash, indicating that the MPX 1 is armed to
perform the initialization procedure.
Press Yes to initialize. Press any other button to disarm the initialize function.
Adjusting Pedal
Tension
The tension of the foot pedal can be adjusted tighter or looser according to your
preference. Use a #2 Phillips-head screwdriver to adjust the screw located on
the right side of the pedal (as viewed from the top).
Reinitialization of the
MPX R1
Reinitialization of the
MPX 1 and the MPX R1
