Lexicon MC-12 Balanced Manual Download Page 13

Page: 13 / 94

Lexicon, Inc.
MC-12 Serial Communications Protocol

Printed on: 08/18/03

13 of 94

7.1.5 MC-12 Parameter Notification by Id (MC-12)

MC-12 will transmit parameter change notifications if they are enabled using the command described in

7.3.42 (MC12_Set_Parameter_Notification_By_Id)

. If a parameter value is changed due to any user action

or system action the MC-12 will transmit the current value of the parameter that is changing.

7.1.5.1 Command Packet Description

Application Header:

Command

MC_PARAM_NOTIFICATION_BY_ID

0x05

Data Count

0x18

Application Data:

Data[0]

ParamId(LSB)

Data[1]

ParamId(MSB)

Data[2]

ParamType

Data[3-23]

Value[0 -20]

nn nn
nn…

7.1.5.2 Data Description

Same as

Paragraph 7.3.37.2

7.1.5.3 HOST Response

The MC-12 does not expect any response from the HOST.

7.1.5.4 Defaults

The following Parameters Notifications are Enabled in the MC-12 default state:

Summary of Contents for MC-12 Balanced































































































Search results

Summary of Contents for MC-12 Balanced

Reviews:

Related manuals for MC-12 Balanced

Brands by name

Popular brands

Lexicon MC-12 Balanced, Manual

Search results

Summary of Contents for MC-12 Balanced

Reviews:

Related manuals for MC-12 Balanced

Brands by name

Popular brands