Lexicon M300L, Owner'S Manual

Page: 121 / 162

5-20
Lexicon 300L Owner's Manual
MA: B12P3 CHORUS MB: B15P1 SHIFT IT!
This preset combines a stereo chorus passing into a mono shift program. BMIX is set to 60%
meaning some of the stereo chorus bypasses the mono pitch shift. Modify the Glide Pitch (GLD)
parameter in Machine B to suit your taste. The LFO is set moderatly fast, to 2.16Hz, with a Triangle
shape.
MA: B12P3 CHORUS
This preset makes use of a small variation in the glide delay to modulate the sound. The glide moves
between 9.7ms and 11.8ms. Advancing the LFO to values near 1.50Hz to 2.0 Hz yields a nice
chorusing effect. There are no other delay lines, but the output lines are channel-swapped such that
the left input passes to the right output, and vice-versa. (In a Dual Mono Setup, of course, this is
inaudible.)
MB: B15P1 SHIFT IT!
Baseline mono shift program with no pitch shift. Go to the glide parameter (GLD) in Program Edit
mode to adjust the amount of mono pitch shifting you want.
P133 CC:PCH->DLY SoftSlider DELAY SPACE 40
MA: B15P6 VOCAL SHIFT MB: B11P5 PINGOPONGO
This is a very interesting detuned left/right delay effect. The SoftSlider controls the timing of the
bouncing delays. The stored value of the SoftSlider parameter is 40. Try with AMIX set to 40% OR
try with BMIX set to 60%.
MA: B15P6 VOCAL SHIFT
This preset combines a short delay line recirculating around a maximum -21 cent pitch shifter.
However the amount of pitch shifting will vary with the input level, going more negative in pitch as
the level increases.
MB: B11P5 PINGO PONGO
Ping - Pong delays bouncing back and forth. The SoftSlider controls the timing of the bounce.
P134 CC: DLY->COMP SoftSlider DELAY SPACE 50
MA:B11P6 3VOICE DLY MB:B16P1 EZ COMP 2:1
The SoftSlider controls the timing relationships of the 3 voice delay settings in Machine A. The
SoftSlider value is stored at 50.
MA: B11P6 3VOICE DLYS
Two taps (Delays 3 and 4 ) are set with delay ratios of 1:2, meaning that, when one is 200ms, the
other is 400ms, or when one is 359, the other is 718ms. This relationship is patched to the Soft knob.
MB: B16P1 EZ COMP 2:1
A nice preset to add to an overall mix. You may need to adjust the Threshold parameter to make
it work for the particular signal you’re feeding it. Release is set to gently fall away after 363ms.
P135 CC: SLAPS SoftSlider SPACE 50
MA: B16P9 SPATIAL EQ MB: B11P3 STEREO SLAPS
This effect places a Spatial EQ preset ahead of Machine B, which is running a stereo slap delay
program. The SoftSlider controls multiple parameters in each machine. As you advance the
SoftSlider the delays will get a bit longer as well as the amount of negative cross-feed between
channels. Use with moderatly narrow stereo or mono source.
MA: B16P9 SPATIAL EQ
This preset has 3 SoftSlider patches; Spatial EQ, Left Bass +/-, Right Bass +/-. As you advance or
reduce the SoftSlider, the amount of “spaciousness” is increases or decreased.
MB: B11P3 STEREO SLAPS
Stereo left and right slap delays with the SoftSlider patched to left and right Delays 1 and 2 as well
and the Left and Right Post Delay outputs.
P136 CC:PCH->COMP SoftSlider LFO 50