22
To start recording:
1. Click the
Record
button on Cubase
®
LE’s Transport control.
Record Button
2. Speak, sing, or play the instrument.
3. When you are finished recording, press the
Stop
button.
Stop Button
4. Press the
Zero
button to return to the beginning of the session then press the
Play
button to listen to the track you just recorded.
Zero and Play Buttons
NOTE:
Make sure the
Monitor Mix
knob is set to the 12 o'clock position
then turn the
Output Level
knob to adjust the monitoring level. See
"E.
Setting Monitor Levels" on page 23
for more information.
5. To overdub a track, create a new track as previously described then make sure
the record button on the new track is enabled and any previously recorded tracks
are not record enabled. This will allow you to record to the new track without
affecting the previously recorded tracks.
Using the Lambda Studio – Recording with the Lambda Studio
