Lexicon JAM MAN User Manual Download Page 2 | Manualshive

Page: 2 / 32

background image

Lexicon Part #070-09276

Printed in the U.S.A.

Unpacking and Inspection

After unpacking the unit, save all packing materials in case you ever need to re-ship. Thoroughly inspect the unit and packing materials for signs of damage.
Report any shipment damage to the carrier at once; report equipment malfunction to your dealer.

This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer's instructions, may cause
interference to radio and television reception. It has been type tested and found to comply with the limits for a Class B computing device in accordance with the specifications in
Subpart J of Part 15 of FCC Rules, which are designated to provide reasonable protection against such interference in a residential installation. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment
OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures: reorient the receiving antenna; relocate the computer with respect
to the receiver; move the computer away from the receiver; plug the computer into a different outlet so that the computer and receiver are on different branch circuits. If necessary,
the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet prepared by the Federal
Communications Commission helpful: "How to identify and Resolve Radio/TV Interference Problems." This booklet is available from the U.S. Government Printing Office,
Washington, DC 20402, Stock No. 004-000-00345-4.

Notice

Lexicon Inc.
3 Oak Park
Bedford, MA 01730 USA
Telephone 781-280-0300
Fax 781-280-0490

Copyright



1993, Lexicon Inc.

All Rights Reserved.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This triangle, which appears on your com-
ponent, alerts you to the presence of unin-
sulated, dangerous voltage inside the en-
closure... voltage that may be sufficient to
constitute a risk of shock.

This triangle, which appears on your com-
ponent, alerts you to important operating
and maintenance instructions in this ac-
companying literature.

Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la class B prescrites dans le Règlement sur
le brouillage radioélectrique édicté par le ministère des Communications du Canada.

«
1
2
3
4
...
»

Summary of Contents for JAM MAN

































Reviews:

No comments

Related manuals for JAM MAN

Brand: ABB Pages: 14

Brand: MAHLE Pages: 21

Brand: B&K Pages: 12

Brand: Datavideo Pages: 48

Brand: Datavideo Pages: 34

Brand: Datavideo Pages: 3

Brand: Datavideo Pages: 34

Brand: Datavideo Pages: 8

Brand: Datavideo Pages: 10

Brand: EAW Pages: 2

Brand: abc Pages: 28

The Wave Transformer

Brand: EarthQuaker Devices Pages: 21

SC 2 Deluxe EasyFix

Brand: Kärcher Pages: 12

Brand: Kärcher Pages: 16

Brand: Uchida Yoko Pages: 40

Brand: Öhlins Pages: 8

Brand: ?HC Pages: 2

Brand: Garrick Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands