3
DC-1 Version 3 Digital Controller
Installation
The Remote Control
1 ON, FP and OSD
ON turns the DC-1 on and
selects the input last used
with main and Zone 2 volume
levels set to the levels cho-
sen in the OUTPUT LEVELS
menu.
FP (ON) turns on the front
panel display backlight and
the Lexicon logo.
OSD (ON) activates the DC-1
on-screen display.
2 OFF, FP and OSD
OFF puts the unit into standby
and mutes all of the outputs.
OSD (OFF) turns off the on-
screen display.
FP (OFF) turns off the front
panel display backlight and
the Lexicon logo.
3 SELECT,
▲
,
▼
and DONE
Allow access to and adjust-
ment of all displayed menu
items.
▲
and
▼
step a dis-
play cursor through listed
menu items. SELECT dis-
plays submenus, or chooses
a menu item for adjustment.
The
▲
and
▼
buttons alter
the settings of selected pa-
rameters. DONE saves the
current changes and exits the
menu.
4 Shift
When pushed in conjunction
with other remote buttons,
activates a set of less-used,
but convenient, functions.
5 Record/Zone 2
When pushed in conjunction
with other remote buttons,
activates a set of Record/
Zone 2 control functions.
6 Light
Toggles the remote control
backlight on and off. (Note:
after seven seconds, the
backlight is automatically
turned off.)
7 FX
▲
and
▼
These controls display, then
change the current effect. The
activated displays (FP or
OSD) will show the effect
name.
8 VOL
▲
and
▼
These controls display, then
adjust the current master vol-
ume level. The activated dis-
plays (FP or OSD) will show
the volume level and a visual
guage.
When Mute is engaged, these
controls display, then adjust
the volume from the mute
level. When full mute is en-
gaged (
⇑
Mute), these con-
trols increase or decrease the
selected volume level with-
out disengaging full mute.
9 Mute
Engages Mute and reduces
the volume by the amount
selected in the OUTPUT LEV-
ELS menu. The red Mute LED
on the front panel will light
and the activated displays (FP
or OSD) will show MUTE ON.
Pressing again restores the
volume to its pre-Mute level,
turns off the front panel Mute
LED, and displays MUTE
OFF on the active displays.
10 Input Selection
Individual buttons select from
8 inputs and activate a corre-
sponding green LED on the
front panel. Depending on the
Setup configuration, selection
may also load a new effect.
11 EFFECTS
These controls select Dolby,
THX, Logic 7, dts, 2-Chan-
nel, Party, TV Matrix or Music
playback. The actual effect is
determined by the format of
the input signal.
Note: When 2-Channel is
engaged, pressing the but-
ton again will turn it off.
