6
English
7
English
Alarm
1. In time mode, press [MODE] once to select alarm mode.
2. Press and hold [SET] until hour digit flashes.
3. Press or to adjust digit.
4. Press [SET] to select minute for adjustment.
5. Press [SET] to confirm alarm time settings.
Press the key to activate/deactivate the alarm. When the alarm is
on, the icon is displayed onscreen. Press the key once more to
activate/deactivate the snooze function. When the snooze is on, the
icon
is displayed onscreen.
Notes:
- When the alarm rings, press any key to stop it. It will ring again the
next day at the same time unless the alarm is turned off.
- When the alarm rings and the snooze function is on, press any key
to stop the alarm momentarily. It will ring again 10 minutes later,
unless the snooze function is turned off.
World Time Clock
This function allows you to adjust the clock to a time zone. It is
particularly useful for travelers. Set the clock to the city you are
located in, or to a city in the same time zone.
1. In time mode, press [MODE] twice to select the world time clock.
2. Press the key to select the city in which you are located.
3. Press to adjust the summer saving time function.
4. Press and hold [SET] to set the world time as the local time. When
the local time is the same as the world time, the icon
flashes.
Thermometer
In time mode, press the key to toggle between temperature display
in ºC or in ºF.
Countdown
1. In time mode, press [MODE] thrice to select the countdown function.
2. To set the time at which you wish the unit to count down from,
press and hold [SET] until hour digit flashes. The maximum time is
23 hours, 59 minutes and 59 seconds.
3. Press the or keys to set the hour. Press [SET] to confirm.
RADIO
4. The minutes’ digits flash. Press the and keys to adjust the
minutes.
5. Press [SET] to confirm. The seconds’ digits flash.
6. Press the or keys to adjust the seconds. Press [SET] to
confirm and launch the countdown.
Press the key to stop/continue the countdown. When the count-
down is paused, press the key if you wish to reset it.
Setting a radio frequency and storing a channel
The RP200 radio displays 6 FM groups (FM1 to FM6) and each
group has 5 memory spaces (S1 to S5) available to store up to 30
radio frequencies.
1. Press the [RADIO] key to turn on the radio or the radio wake-up
function.
2. Press [SET] to go from the FM1 to the FM6 radio group.
3. Press the or key to change the radio frequency.
4. To store a frequency into one of the 5 spaces available (S1 to
S5), select a frequency and press and hold for 2 seconds the
space key (S1 to S5) you wish to store it in. Once a frequency is
stored, simply press the corresponding space key to tune in to
that frequency.
Searching radio frequencies automatically
This function allows you to scan all the radio frequencies within the
reception range of your unit and saves them into the radio memory
spaces. The first frequency will be saved in the S1 space of FM1,
the second frequency in S2, FM1, and the last one in S5, FM6.
Please note that the RP200 can save up to 30 radio frequencies.
1. Press the radio key to turn on the radio.
2. Press and hold the [RADIO] key for 2 seconds. ‘SLP’ is displayed
onscreen.
3. Press and hold the [SET] key for 2 seconds.
4. ‘SCN’ is displayed onscreen during the auto scan and the
frequency digits move up quickly. Once the auto scan is over, the
first frequency stored will be displayed.
