background image

11

English

11

SAFETY PRECAUTIONS

!

!

CAUTION:

 TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER 

(OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO 

QUALIFIED SERVICE PERSONNEL.

WARNING:

• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

• The apparatus shall not be exposed to dripping or splashing and that no objects filled with 

liquids, such as vases, shall be placed on the apparatus.

• The mains plug is used as the disconnect device, the disconnect device shall remain readily 

operable.

• In order to disconnect the apparatus from the mains completely, the mains plug should be 

disconnected from the mains socket outlet completely.

The graphic symbols at the bottom of the set mean the following:

DANGEROUS VOLTAGE:

 The lightning flash with arrowhead symbol 

within an equilateral triangle is intended to alert the user to the presence of 

uninsulated “dangerous voltage” within the product’s enclosure that may be of 

sufficient magnitude to constitute a risk of electric shock to persons.

ATTENTION: 

The exclamation point within an equilateral triangle is intended 

to alert the user to the presence of important operating and maintenance 

(servicing) instructions in the literature accompanying the appliance.

DANGER:

 Invisible and hazardous laser radiation when open and interlock 

failed or defeated. Avoid direct exposure to beam.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

DANGER

LASER SAFETY

This unit employs an optical laser beam system in the CD mechanism, 

designed with built in safeguards. Do not attempt to disassemble, refer to 

qualified service personnel. Exposure to this invisible laser light beam may be 

harmful to the human eye.

THIS IS A CLASS-1 LASER PRODUCT. USE OF CONTROLS, 

OR ADJUSTMENTS OR PROCEDURES OTHER THAN THOSE 

SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS LASER 

LIGHT BEAM EXPOSURE.

Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to 

laser beam.

RCD102seriesIM1084_19Feb_V10.indd   11

19/02/2014   3:14 PM

Summary of Contents for RCD102series













Reviews: