Copyright © Lexibook 2005
16
Set up:
To set up a new sensor, follow the instructions given on page 5. Make sure you set every sensor to a
different channel.
Temperature and humidity and display :
You can view the humidity and temperature readings of your different remote sensors by pressing the
[B2]
key. The sequence is as follows:
The sign ‘
’
[A12]
means that the unit will display your available channels alternatively.
Press and hold
[B2]
to remove a channel manually. It will automatically search and register new chan-
nel again if a new channel is received. If no temperature is displayed on an existing channel (“
- - . –
“
is displayed on the LCD), press and hold
[B2]
to cancel that channel and receive the channel again.
Then, press
[D3]
on the corresponding sensor unit to transmit the signal to the main unit manually.
Additional sensors:
Measure temperature and hygrometry in other places!
- Upstairs
- In the baby's bedroom
- In the basement
- In the wine cellar
- In another room
To order, phone the Lexibook office located in your country or browse www.lexibook.com.
ACCESSORIES
