4
5
ENGLISH
Insert the plug of
the lamp into the
UK plug.
Secure the plug
by tightening
the screw.
Light bulb installation
WARNING! Do not have the lamp plugged to a power outlet during light bulb installation.
1. Using a screwdriver, unscrew the screw located under the lampshade.
2. Hold the lampshade and lamp foot simultaneously to turn the foot to the left to the end.
3. Separate the lamp and the lampshade.
4. Carefully screw an E27 bulb into the hole provided (drawing 1).
5. Replace the lampshade on the bottom part of the lamp, making sure to not hit the bulb. The two ar-
rows on the lamp base and the lamp cover must be aligned.
6. Screw the screw back in with a screwdriver in the designated area.
Switching on/off the lamp
Plug the cable into a power outlet. To turn on/off, press the switch on the cable.
WARNING! For you own safety, do not cover the lamp at any time. Do not project light towards your
face or another person. Do not look directly at the bulb.
Important safety instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions
5. Do not use this product near water and moisture, for example: near a bathtub, washbowl, kitchen
sink or laundry tub; in a wet basement; or near a swimming pool.
6. Clean only with a dry cloth. Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. It may damage the screen.
7. Do not block any ventilation openings. Install in accordance with manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10.The socket-outlet shall be installed near the equipment and shall be easily accessible.
11. Protect the power cord from being walked on or pinched particularly at plugs, convenience recepta-
cles, and the point where they exit from the apparatus.
12. Only use attachments/accessories specified by the manufacturer.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture does
not operate normally, or has been dropped.
15. Do not overload wall outlet. Use only power source as indicated.
16. Use replacement parts as specified by the manufacturer.
17. Never push objects of any kind into this product through openings as they may touch dangerous
voltage points or short out parts that could result in fire or electric shock. Never spill or spray any
type of liquid on the product.
18. The product may be mounted to a wall only if recommended by the manufacturer.
For the UK
NB - If your lamp already comes with a UK plug, please ignore the following paragraph.
Before 1
st
use, you need to insert the plug of the lamp into the UK plug. Ensure the pins are firmly se-
cured in contact.
Caution: The UK plug does not convert voltage.
Before first use, the lamp requires the installation of an E27 bulb (max. 10W).
LT010seriesIM2290_327_V11.indd 4
17/7/2020 10:31 AM
