“There is inter-
ference and
noise on the
line.”
Move the cordless handset
closer
to the base
telephone, or to a different position.
Try moving the base telephone so that it’s
not near
other electrical equipment
, such as a television or a
computer.
Try a
different position
for the base telephone, making
sure it’s not too near to any other electrical equipment.
“When I press
the PHONE or
SPEAKERPHONE
button, I hear a
strange loud
noise.”
This is caused by interference. Disconnect the mains
power lead from the back of the base telephone, then
wait for 30 seconds before reconnecting it.
“I hear ‘beeps’
from my
cordless
handset while
I’m on a call.”
You may be going
out of range
of the base telephone.
Move closer, or your call may be cut off.
Check the
Battery Level
symbol on the display. If it is
low, recharge the batteries.
“The Caller
Display feature
isn’t working.”
You need to
subscribe
to the Caller Display feature
from BT or your service provider.
The caller may have
withheld
their number by dialling
141. Or they may be calling from a network that does
not transmit the Caller’s number (for example, it may
be an international call).
“The volume in
the earpiece is
low when I’m
on a call.”
Make sure you’re holding the handset earpiece correctly
over your ear.
Adjust the volume as decribed on pages 11 (base
telephone) and 15 (cordless handset).
Troubleshooting
30
E:\Binatone2003\BigButtonCombo\BigButtonCombo_01.vp
23 December 2003 11:47:01
Color profile: Generic CMYK printer profile
Composite Default screen
