Before you start
Interference
If the sound quality gets worse as you move around
while you’re using the cordless handset, this is probably
caused by interference between the handset and the
base unit, perhaps because you are too near to another
phone or other electrical equipment.
Move to a different position
to clear the interference.
If you do not move, your call may be cut off.
!
Radio interference in the environment may occasionally
cause a short break in the link between the cordless
handset and the base unit while you are on a call.
The handset’s display will flash briefly, while the link
is automatically restored.
‘Out of range’
warning
If you hear a
warning tone
during a call, and/or the
sound in the earpiece becomes faint or distorted, you
may be going out of range of the base unit.
Move
nearer to the base unit within 20 seconds
, until the
tone stops. Otherwise, your call may be cut off.
Installation and set-up
Binatone Help Line:
01325 304 473
9
Make sure the mains socket is
switched on if you want to use
the cordless handset or the
speakerphone — they will not
work without electrical power
Connect the base telephone to the telephone line
Switch off power at the mains socket
Insert the telephone line plug into
the socket as shown
Switch mains power back on
8
Use the plug to
raise the shutter
before pushing
it into the socket
NOTE: the charger pod does not have
a connection to the telephone line.
E:\Binatone2003\BigButtonCombo\BigButtonCombo_01.vp
23 December 2003 11:46:58
Color profile: Generic CMYK printer profile
Composite Default screen
