background image

Important note — emergency calls

The Big Button Combo cordless handset is not
designed for making emergency calls when the mains
power fails. If you ever need to call Emergency Services
during a power failure, use the base telephone, lifting
the handset rather than using the speakerphone.

If you need help …

The Binatone Help Line is available from 9.00 am to
5.00 pm, Monday to Friday, on

01325 304 473

Unpacking your Big Button Combo

In the box are:

one or more cordless handsets (depending on the
system you have purchased)

one base telephone (which is also the base unit for
the cordless handset), including a corded handset

a mains power lead and adapter for the base telephone

a telephone line cable for the base unit telephone

a rechargeable battery pack and a battery
compartment cover for each handset

depending on the system you have purchased, up to
four charger pods, each with mains power lead and
adapter attached

Keep the packaging materials in a safe place in case
you later need to transport the unit.

Keep your sales (till) receipt, which is your guarantee.

E:\Binatone2003\BigButtonCombo\BigButtonCombo_01.vp
23 December 2003 11:43:38

Color profile: Generic CMYK printer profile
Composite  Default screen

Summary of Contents for DPC280









































Reviews: