Industrial Ladder Tower
Double Width Tower Assembly Guide
Industrial Ladder Tower
Double Width Tower Assembly Guide
1.6
Clip the second brace in the same position, on the other side of the frames. Make sure the
base is level using a sprit level. Any alterations needed, can be adjusted on the legs.
1.7
Make sure the Trigger is facing the outside of the frame.
1.8
Insert the next section – this may vary in size depending on which tower you have.
However, the image we have used, is an 8 Rung (2m high) frame.
1.10 Insert the adjacent frame.
1.11 Clip the diagonal braces onto the lowest rungs.
1.9
Clip the diagonal braces onto the lowest rungs.
Assembly Procedure
