11
3.
4.
In Motor Mode:
5.
On/Off the power supply of motor.
Fill in the ID of the servo you want to
control, the default value is 1, range 0 ~
253, you can only control one servo at the
same time.
Two modes: servo mode and motor mode
In Servo Mode,
Position: you can drag the slider to make
servo rotates ,the faster you drag, the
faster the servo rotates
Time:set the rotation time of the servo, the
greater the time value, the slower the
rotation of the servo
Drag the slider to chance the speed value.
When the speed value is 0, the servo is in a
stopped state.
When the speed is positive, the servo turn
counterclockwise, the greater the speed
value, the faster the rotation speed.
When the speed is negative, the servo turn
clockwise , the smaller the speed value ,the
faster the rotation speed.
Summary of Contents for LX-16A
Page 1: ...1 LX 16A Bus Servo User Manual...
Page 8: ...8 4 Connection diagram...
