Levolor Woods Standard, User Manual

Page: 8 / 56

8
Activating and Operating
Remote Control Guide
JOIN A BLIND TO A GROUP
NOTE: The LEVOLOR ® remote will not operate a blind until
the window covering has been added to a GROUP.
1. Press and hold
■
STOP until the RED programming
light on the lower left of the remote starts flashing,
then release. This puts the remote in program mode.
2. Press the desired GROUP number (1, 2 or 3) on the
remote. The GREEN GROUP indicator light above
the GROUP button will flash to show it is selected.
3. With one hand press and continue to hold the
manual control button located on the headrail.
4. While continuing to hold down the manual control
button, use your other hand to press and hold
▲
UP ARROW on the remote until the window covering
moves slightly to indicate it has been joined to
the GROUP.
5. Release both buttons.
6. To exit program mode press and hold
■
STOP until
the lights stop flashing
NOTE: It is recommended that only similar window coverings
be included in a GROUP because of differences in product
features and operation.