Levolor Woods Standard, User Manual

Page: 5 / 56

5
Explanation of Functions
1 2 3
all
open
close
Remote Control Guide
FAVORITES
Setting FAVORITES stores a preferred position
for each individual blind, and recalls stored po-
sition when the FAVORITES button is selected.
(FAVORITES button is designated by the heart
♥
symbol.) Each blind can have ONLY ONE FAVORITE position.
Upon arrival, each of your blinds will be set to the default FA-
VORITE position, which is slats tilted up at a 45 degree angle.
You can re-program each blind to your FAVORITE position.
NOTE : the FAVORITE position for a given blind is stored in the
blind itself. The favorite position is always the same regardless
of which GROUP or GROUPS the blind is assigned to or which
remote you use. If you set a FAVORITE with one remote on one
blind, and then overwrite it with another FAVORITE position
with a different remote, you will only have the FAVORITE as set
by the last remote. From now on, any remotes programmed
to that blind will trigger the same FAVORITE position.
See page 9 "Set a FAVORITE position".
MORE THAN ONE REMOTE
Each motorized blind can be ordered with or without a
remote. If you chose to have multiple remotes, you have
two options in how each remote will function.
1. Additional remote
• Can be programmed differently from original remote.
• Can control a different set of blinds and/or
different GROUPS.
2. Duplicate remote
• An exact duplicate of original remote.
• Must control the same set of blinds and/or
GROUPS.
See page 12 for instructions on creating duplicate remote.
TRAVEL LIMIT/STOPS
The points when a slat stops along its travels. The slats
should travel from fully closed tilted down, to fully closed
tilted up. If the slats do not travel as expected, these limits
can be adjusted by resetting the blind travel limits.
See page 13 for instructions on Resetting Travel Limits.
FAVORITES Button