Levolor Woods Standard, User Manual

Page: 11 / 56

11
Additional Programming
Remote Control Guide
REMOVE A BLIND FROM A GROUP
1. Press and hold
■
STOP until the RED programming
light on the lower left of the remote starts flashing,
then release. This puts the remote in program mode.
2. Press the desired GROUP number (1, 2 or 3) on
the remote. The GREEN GROUP indicator light
above the GROUP number will flash to show it
is selected.
3. With one hand press and continue to hold the
manual control button.
4. While continuing to hold down the manual control
button, press and hold
▼
DOWN ARROW on the
remote until the DOWN ARROW moves slightly to
indicate it has been removed from the GROUP.
5. Release both buttons.
6. To exit program mode press and hold
■
STOP until
the lights stop flashing.
MORE THAN ONE REMOTE
Each motorized window covering can be ordered with or
without a remote. If you chose to have multiple remotes
you have two options in how each remote will function.
1. Additional remote
• Can be programmed differently from original remote.
• Can control a different set of blinds and/or
different GROUPS.
2. Duplicate remote
• An exact duplicate of original remote.
• Must control the same set of blinds and/or
GROUPS.