User Manual for LEVIFLOW
®
LFSC-D Flowmeters
www.levitronix.com
PL-4507-00, Rev08, DCO# 20-024
29
8
Appendix
8.1 Regulatory Status
8.1.1 CE Marking
The
LEVIFLOW
®
clamp-on flowmeters of the
LFSC-D
series, in its various configurations, is in conformity
with the below mentioned
European Directives
. The flowmeter system is thought to be used in hydraulic
circuits of production equipment of Bioprocessing and Pharmaceutical industry.
Part Name
Description
LFSC-xxD
Flowsensors:
LFSC-05D
(0 - 1 lpm, rated for 6.5 bar without tubing limitation)
LFSC-08D
(0 - 4 lpm, rated for 6.5 bar without tubing limitation)
LFSC-12D
(0 - 20 lpm, rated for 6.5 bar without tubing limitation)
LFSC-22D
(0 - 80 lpm, rated for 4 bar without tubing limitation)
LFSC-30D
(0 - 160 lpm, rated for 3 bar without tubing limitation)
LFC-1C-PC
LFC-6CIO-PC
Single-Channel Converter: 24V DC supply input.
Six-Channel Converter: 24V DC supply input.
EMC Directive 2014/30/EC:
The following standards of the EMC directive are tested and confirmed at a certified laboratory:
EN61000-6-2
Generic standards, Immunity for industrial environments
EN61000-6-4
Generic standards, Emission standard for industrial environments
Machinery Directive 2006/42/EC:
The machinery directive essentially has been followed by a risk analysis, according mitigation actions and a
user manual for safe operation. For the design and testing the following standards are used as a guideline:
EN ISO 15494
Plastic piping system for industrial applications
ISO12100
Safety for machinery
– principles for risk assessments: used for system risk analysis.
Pressure Equipment Directive 97/23/EC:
The pressure equipment directive is used as guideline according to
Category I Modul A
(internal quality
control). For maximum pressure validation the following standard is followed:
EN ISO 15494
Plastic piping system for industrial applications
It shall be noted that the maximum pressure for the clamp-on sensor has been tested without tubing
limitations. For the pressure rating of the clamp-on sensor with the mounted tubing, the specification of the
used flexible tubing material must be consulted in order to avoid bursting effects not covered by the clamp-on
sensor specifications.
8.1.2 Disposal of Equipment
– WEEE Directive 2012/19/EU
Follow local legislation for disposal of equipment. In the European Union (EU) marked (
) devices are governed by the
European WEEE Directive 2012/19/EU. Do not dispose with normal waste.
