18
data. Follow the prompts to
complete this process.
NOTE: Update DB (no. 3
and 4)
are only available on
secondary RZCPG remotes.
3.
Update DB (Man)
is used
to manually perform a
database update (devices in the network, their
names and types) for a secondary remote that
has joined the network. It will require you to
press buttons on each individual device you
wish to update in your secondary remote.
4.
Update DB (Aut)
is used to perform an
automatic database update (devices in
the network, their names and types) for a
secondary remote that has joined the network.
8. Replace Node
Use this option to replace
non-operational devices in
the network. Once the list is
generated, you will press the
center button to select
a device to replace. You will
be prompted to prepare the
controller to be replaced or
to press a button on a slave
device to be replaced when
prompted. The button press
will occur after you initiate
the replacement process by
pressing the center button
on the RZCPG. After
replacement you can name the replacing device
(refer to TEXT EDITOR
pg. 6)
. Once your name is saved, you will receive
confirmation that the node has been replaced.
x1
Cancel
FAILED NODE
Building Node List
Complete...65%
x1
Ba ck
REPLACE NODE
Home
Bedroom
Bathroom
Hall
Room Controller
x1
Ba ck
REPLACE NODE
Home
Prepare replacing
controller or press
button on slave
when prompted
Start? Press
x1
Back
Next Step
Node replaced!
Node ID# 8:
Garage
More? Press
REPLACE NODE
x1
Back
Home
RX DATA
Setup Data
Areas
Profiles
Start? Press
Select receive items
Summary of Contents for Programmer/Remote
Page 23: ...NOTES ...
