DESCRIPTION OF ZONE TYPES
ENTRY/EXIT
ENTRY/EXIT ZONE types are intended for doors. ENTRY/EXIT ZONES are armed in security modes DAY, NIGHT, AWAY, and
9$&$7,21,Q'$<DQG$:$<PRGHVWKHUHLVDQHQWU\GHOD\GH¿QHGE\(175<'(/$<RQ(175<(;,7=21(6WRDOORZ
\RXWRJHWLQWRWKHKRXVHDQGWXUQRIIWKHDODUPEHIRUHLWVRXQGV,Q1,*+7 '$<,167$17PRGHWKHUHLVQRHQWU\GHOD\VRWKDW
the alarm sounds immediately if someone opens a door.
,IDQ(175<(;,7=21(LVWULSSHG¿UVWFHUWDLQRWKHU]RQHVLQWKHHQWU\SDWKZLOODUHGHOD\HG
PERIMETER and LATCHING PERIMETER
PERIMETER ZONE types are intended for windows and exterior doors not requiring an entry delay. All PERIMETER ZONES
are armed in security modes DAY, NIGHT, AWAY, and VACATION. There is not an entry delay on a perimeter zones. If a window
or door on this zone is opened while the security system is in DAY, NIGHT, AWAY or VACATION mode, the alarm will sound
immediately. LATCHING PERIMETER ZONES ignore the status of that zone during power cycles.
NIGHT INTERIOR and LATCHING NIGHT INTERIOR
1,*+7,17(5,25=21(6DUHLQWHQGHGIRUPRWLRQGHWHFWRUVLQDUHDVZKHUHQRRQHVKRXOGEHZKLOH\RXDUHVOHHSLQJLQ\RXUKRPH
)RUH[DPSOHLI\RXKDYHDWZRVWRU\KRPHDQGVOHHSXSVWDLUV\RXUGRZQVWDLUVPRWLRQGHWHFWRUVVKRXOGEHRQD1,*+7,17(5,25
ZONE.
NIGHT INTERIOR ZONES are armed in security modes NIGHT, VACATION, and AWAY only. There is no delay on a NIGHT
,17(5,25=21(1LJKWLQWHULRU]RQHVDUH127DUPHGLQ'$<RU'$<,167$17PRGHVRWKDW\RXPD\PRYHDERXWIUHHO\
in your home when the security system is in DAY or DAY INSTANT mode, while still having the windows and doors protected.
LATCHING NIGHT INTERIOR ZONES ignore the status of that zone during power cycles.
AWAY INTERIOR
and LATCHING AWAY INTERIOR
$:$<,17(5,25=21(6DUHIRUDUHDVRI\RXUKRPHZKHUHQRRQHVKRXOGEHZKLOH\RXDUHDZD\,QWKHSUHYLRXVH[DPSOH\RXU
XSVWDLUVPRWLRQGHWHFWRUVVKRXOGEHRQDQ$:$<,17(5,25=21($:$<,17(5,25=21(6DUHDUPHGRQO\ZKHQWKHVHFXULW\
mode is AWAY. LATCHING AWAY INTERIOR ZONES ignore the status of that zone during power cycles.
PANIC
3$1,&=21(6DUHIRUHPHUJHQF\SXVKEXWWRQVZLWFKHVDQGKROGXSGHYLFHV3$1,&=21(6DUHDOZD\VDUPHGHYHQLIWKHVHFXULW\
mode is OFF. There are no delays on PANIC ZONES. An emergency dial out is activated after the DIAL OUT DELAY.
TAMPER and LATCHING TAMPER
This zone type is used to monitor tamper switches in security sensors, enclosures, and on other security devices. If the tamper switch
connected to the device is violated and if the security system in the respective area is disarmed, the zone will report tamper. If the
security system in the respective area is armed, the zone will cause an alarm. This zone will make a digital dial out when violated
when the respective security area is either armed or disarmed.
LATCHING TAMPER ZONES ignore the status of that zone during power cycles.
POLICE EMERGENCY
7KLV]RQHW\SHDFWLYDWHVWKHEXUJODUDODUPDQGVRXQGHU$QHPHUJHQF\GLDORXWLVDFWLYDWHGDIWHUWKH',$/287'(/$<
DURESS EMERGENCY (SILENT DIAL OUT)
'85(66=21(6DUHIRUHPHUJHQF\SXVKEXWWRQVWKDWDFWLYDWHD6,/(17GLDORXWQROLJKWVÀDVKLQJDQGQRVRXQGHU,IWKLV]RQHLV
accidentally tripped, you will not know that the
Omni
IIe is making a silent dial out, and hence won’t know to stop it.
To stop a silent dial out once it has started, you must go to the console and press OFF then enter your code.
Page 40
WEB
VERSION
