Rev. A
Page 19
Channel Chase + Scene
A channel chase can be executed while a scene is active in the background. Please follow below.
1. Press
the
[SC]
key while the chase is running:
2. Enter
[1]
or whatever scene # desired:
3. Press
[ENTER]
to confirm:
To change the start channel of the chase,
press the
[
T
] [
S
]
keys or use the keypad.
If a channel level of a scene is higher then the same channel of the chase, the scene’s channel
level will be output (and vice versa). This is because the console operates in an HTP (Highest
Takes Precedence) mode.
Sub Chase
There are two submaster chases available; one will chase through subs 1 - 6, the other will chase
through subs 3 - 6.
Procedure:
Notes:
1. Press
the
[FUNC]
key:
2. Press
the
[
T
]
key three times:
3. Press
[ENTER]
:
Use the
[
T
] [
S
]
keys to select sub chase.
4. Press
[ENTER]
:
To change the chase speed, use
the
[
T
] [
S
]
keys .
5. Raise faders to desired levels:
6. To stop the chase, press
[FUNC] [ENTER]
.
LOAD SCENE _
KEYIN SC 1...40
LOAD SCENE 1
ABC
CH CHASE 1-- 6
MAS.=100% 0.5sec
>CH SETTING
SUB MASTER
CHANNEL CHASE
>SUB CHASE
> CHASE 1 - 6
CHASE 3 - 6
SUB CHASE 1-- 6
MAS=100% 0.5sec
SUB CHASE 1-- 6
SUB1=100% 0.5sec
