Chapter 2 Operation
Page 12
N1000-006
Scenes
As mentioned earlier, a scene is a recorded lighting look that is comprised of individual channel levels.
With this console, up to 46 scenes may be recorded for future playback.
There are two methods of recording and recalling scenes. The first way is by recording a scene to one
of the six submasters. The scene can then be recalled by either raising a sub fader or pressing a sub
bump button. The second method is by recording a scene to the 40 scene memory bank. The memory
scene is then recalled by using the scene
[SC]
key.
Recording Scenes to Submasters
In this example, we will set levels on channels one through six and record them into submaster one.
Procedure:
Notes:
1. Raise the Master Fader to 100% (full)
2. Press
the
[FUNC]
key. The LCD displays:
3. Press the
[ENTER]
key:
4. Press
[CH]
[1] [-] [6] [AT] [100] [ENTER]
5. Press
the
[REC]
key.
6. Press the
[SUB1]
key:
7. Press
[ENTER]
Sub is recorded.
Pressing any other key
besides
[ENTER]
will cancel the recording.
Any previously recorded memory scene (see next section,
Recording Scenes to Scene Memory
)
can be re-recorded into a sub fader for quick access. First, recall the scene as noted in the
Recalling Memory Scenes
section further below, then follow Step 5 above.
>CH SETTING
SUB MASTER
CH.SET 1--- 6
CH 1 -----= 0%
CH.SET 1--- 6
CH 1 - 6-= 100%
RECORD TO SC _
KEYIN SC 1...40
SAVE TO SUB1
ENT=SURE ANY=NO
