Chapter 2 Operation
Page 10
N1000-006
Setting Channel Levels using the Keypad
Individual channel levels can be also be set using the keypad. See the example below to set channel 7
to 80%:
Procedure:
Notes:
1. Raise the Master Fader to 100% (full)
Make sure the console is turned On.
2. Press
the
[FUNC]
key. The LCD displays:
3. Press the
[ENTER]
key:
4. Press
[CH] [7] [AT] [8][0]
.
Another method is to use
the
[
S
]
key to
select CH 7.
5. Press
[ENTER]
:
Ch 7’s level is output and the LCD will
advance to the next channel to be set.
Setting a Range of Channels
A range of channels can be set at the same time. For example, to set channels 1 through 6 to 100%,
follow the procedure below:
Procedure:
Notes:
1. Raise the Master Fader to 100% (full)
2. Press
the
[FUNC]
key. The LCD displays:
3. Press the
[ENTER]
key:
4. Press
[CH]
[1] [-] [6] [AT] [100]
5. Press
[ENTER]
:
The levels are output and the LCD will
advance to the next channel to be set.
>CH SETTING
SUB MASTER
CH.SET 1--- 6
CH 1 -----= 0%
CH.SET 7--- 12
CH 7 -----= 80%
CH.SET 8--- 1 3
CH 8 -----= 0%
>CH SETTING
SUB MASTER
CH.SET 1--- 6
CH 1 -----= 0%
CH.SET 1--- 6
CH 1 - 6-= 100%
CH.SET 7--- 12
CH 7 -----= 0%
