FEBC Operation
Page 7
6.0 CHARACTERISTICS
The following specifications are typical design parameters for the Fluorescent Electronic Ballast Controller.
These characteristics are based upon calculations and are not actually tested.
6.1 Electrical Power Characteristics
Input Power
115 / 230 Vac 50/60Hz (Strapped)
Data Input
DMX512, CMX Serial Data
RS485 compatible
Analog Signal Output
Source Current
20 mA @ 12 Vdc (short circuit protected)
Sink Current (Advance ballasts use this parameter)
20 mA @ 2 Vdc
Contactor Drivers
Opto-coupled Zero Crossing
1A @ 240 Vac
Contactor Parameters (in packaged FEBC product)
Normally Open Contacts
20A @ 120 Vac
10A @ 240 Vac
10A @ 277 Vac
(Derate to 10A for ballasts)
6.2 Physical Characteristics
Temperature
+32 to +140 degrees Fahrenheit 0 to +60 degrees Centigrade
Humidity
90% relative humidity (non-condensing)
Summary of Contents for FEBC
Page 8: ...FEBC Operation Page 8...
Page 10: ......
