background image

13

WARNING:

 

TO AVOID FIRE, PERSONAL INJURY OR DEATH DO NOT 

USE

 the switch for the control of high power heating appliances such as 

portable heaters. There can be unexpected consequences if not used with 
care. For example, an empty coffee pot can be remotely turned on. If that 
should happen, your coffee pot could be damaged from overheating. If an 
electric heater is turned on by remote control while clothing is draped over 
it, a fire could result. This module will not control lighting that is used with 
electronic low-voltage and high frequency power supply transformers, nor 
high pressure discharge lamps (HID lighting). This includes mercury-vapor, 
sodium vapor and metal halide lamps.

WARNINGS:

•  

This product is to be installed and/or used in accordance with electrical 
codes and regulations.

•  

Indoor use only.

•  

 If you are unsure about any part of these instructions, consult an 
electrician.

•  

Save this instruction sheet. It contains important technical data along 
with testing and troubleshooting information which will be useful after 
installation is complete.

Safety First

WEB 

VERSION

Summary of Contents for Decora Smart DG15S

















Reviews: