12
Quick Tips
If your switch is not performing as expected, visit
leviton.com/decorasmart or contact technical services.
•
Status light is on but light is off and does not respond:
- Check wiring to confirm hot, neutral and load.
- Ensure the white conductor is a neutral.
Factory default
To reset the switch to factory settings and place into joining mode:
1.
Hold the top of the paddle for a total of
14 seconds.
2.
After the first 7 seconds the light turns
amber. Continue to hold.
3.
After a total of 14 seconds,
the status light will quickly
flash red/amber.
4.
Release the top of the paddle
and the switch will reset.
WEB
VERSION
Summary of Contents for Decora Smart DG15S
Page 1: ...Getting Started Guide Cat No DG15S SWITCH WEB VERSION...
Page 2: ...WEB VERSION...
Page 15: ...WEB VERSION...