background image

3-Way Wiring - Digital/Smart Switch with DD0SR-DLZ 

Switching Remote Application:

3-Way Wiring - Digital/Smart Dimmer with DD00R-DLZ Dimming 

Remote Application:

NOTE: Installation must be compliant with dimmer load ratings.

PK-A3123-10-00-2B

TOOLS NEEDED TO INSTALL YOUR REMOTE

Slotted/Phillips Screwdriver 

Electrical Tape 

Pliers 

Pencil 

  Cutters 

 Ruler

INSTALLING YOUR REMOTE

NOTE: Use check boxes           when Steps are completed.

ON

OFF

ON

OFF

ON

OFF

ON

OFF

ON

OFF

ON

OFF

ON

OFF

ON

OFF

ON

OFF

ON

OFF

ON

OFF

ON

OFF

WARNING: 

TO AVOID FIRE, SHOCK OR DEATH; TURN 

OFF POWER at circuit breaker or fuse and test that power 

is off before wiring!

 

Step 1

 INTRODUCTION

Decora Digital/Decora Smart Matching Dimmer or Switch Remote is designed to be used 

for multi-location control of Leviton’s line of Decora Digital and Decora Smart Dimmers or 

Switches allowing the lighting to be controlled from the main control or the remote location. 

It works using digital circuitry that provides soft fade on/fade off, intuitive operation and a 

stylish form factor that is compatible with Leviton’s Decora wallplates (sold separately). 

White face assembled on device with ivory and light almond face plates included. 

•   ON/OFF LED 

•   Three way communication  

•   Ease of installation – No new wiring

FEATURES

Side Wire Connection 

Side wire terminals accept #14-12 AWG 

solid copper wire only.

Back Wire Connection 

Back wire openings accept #14-12 AWG 

solid copper wire only. 

Preparing and connecting wires:

This remote can be wired using side wire terminal screws or through 

backwire openings.

 

Step 3

5/8" 

(1.6 cm)

Strip Gage 

(measure bare 

wire here)

3-Way or More Applications (Multi-location)

Universal Matching Remotes (Dimming and Switching) 

Cat. No. DD00R-DLZ - Matching Dimming Remote - 120/277VAC, 60Hz

Cat. No. DD0SR-DLZ - Matching Switching Remote - 120/277VAC, 60Hz 

INSTALLATION INSTRUCTIONS

WARNINGS AND CAUTIONS:

•  TO AVOID FIRE, SHOCK OR DEATH; TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT POWER IS OFF BEFORE WIRING!
•  To be installed and/or used in accordance with electrical codes and regulations.
•  If you are unsure about any part of these instructions, consult an electrician.
• Decora

®

 Digital/Decora Smart remotes are not compatible with standard 3-way or 4-way switches. They must be used with compatible Decora Digital/

Decora Smart devices for multi-location switching.

WARNINGS AND CAUTIONS:

•  Use this device WITH COPPER OR COPPER CLAD WIRE ONLY.
•  Use only one (1) Decora Digital/Decora Smart dimmer or switch in a multi-location circuit with up to 4 matching remotes. 

NOTE: The remote(s) will turn the light on at the brightness level selected at the dimmer. 

•  Recommended minimum wall box depth for remotes is 2-1/2".
•  Maximum wire length from switch to all installed remotes cannot exceed 300 ft (90 m).

6

5

4

1
2
3

2

5

4

3

1

4-Way
1.
  First Traveler (note color)

2.  Second Traveler (note color)

3. Neutral

4. Ground

5.  Third Traveler (note color)

6.  Fourth Traveler (note color)

 

 NOTE: The first and third traveler 

wires are used to carry line power 

to the other switch boxes.

3-Way
1.
  Line or Load (Tagged)

2. Neutral

3. Ground

4.  First Traveler (note color)

5.  Second Traveler (note color)

 

 NOTE: The first traveler wire is 

used to carry line power to the 

other switch box.

Identifying your wiring application  

(most common):

NOTE: If the wiring in the wall box does not resemble  

any of these configurations, consult an electrician.

 Step 2

IMPORTANT:
For 3-Way applications
, note that one of the screw terminals from the old switch being 

removed will usually be a different color (Black) or labeled Common. Tag that wire with 

electrical tape and identify as the common (Line or Load) in both the dimmer/switch wall 

box and remote wall box.
For 4-Way applications, note that the old switch being removed will have 4 screws 

plus a ground screw. Tag the two wires connected to the two back screw terminals.

Changing the color of your Remote:

Your remote may include color options. To change color of the face proceed as follows:

1

2

Insert top tabs 

and press in 

bottom tabs to 

attach

Push in sides at 

bottom tabs and 

pull outward to 

release

•  Make sure that the ends of the wires from the wall box are straight (cut if necessary).
•  Remove insulation from wires in the wall box as shown.

Cut 

(if necessary)

 Step 4a

NOTE: DDL06, DDMX1, DDE06, DD710, DW6HD, DW1KD, DH6HD, DH1KD, DZ6HD, 

DZ1KD, DL6HD and DL1KD are compatible with DD00R-DLZ.
NOTE: The Digital/Smart Dimmer must be installed in a wall box that has a Load connection. 

The DD00R-DLZ dimming remote must be installed in a wall box with a Line Hot connection 

and a Neutral connection.

WIRING DD00R-DLZ DIMMING REMOTE
(wall box with Line Hot connection):

Connect wires per WIRING DIAGRAM as follows:

NOTE: Use backwire connection when connecting two wires to one screw terminal.

•  Green or bare copper wire in wall box to Green terminal screw.

•  Line Hot (common) wall box wire identified (tagged) when removing old switch and First 

Traveler (note wire color) to remote terminal screw marked "BK".

•  Second Traveler wall box wire to remote terminal screw marked "YL/RD" (note wire 

color). This traveler from the remote must go to Yellow/Red dimmer lead.

•  Neutral wall box wire to remote terminal screw marked "WH".

WIRING DIGITAL/SMART DIMMER (wall box with Load connection):

Connect wires per WIRING DIAGRAM as follows:

•  Green or bare copper wire in wall box to Green dimmer lead.

•  Load wall box wire identified (tagged) when removing old switch to the Red dimmer lead.

•  First Traveler (color noted above) to the Black dimmer lead.

•  Remove Red insulating label from the Yellow/Red dimmer lead.

•  Second Traveler wall box wire (color noted above) to Yellow/Red dimmer lead. This 

traveler from the dimmer must go to the terminal screw on the remote marked "YL/RD".

•  Neutral wall box wire to White dimmer lead.

•  Proceed to Step 5.

Hot (Black)

Neutral (White)

Digital/Smart Dimmer

DD00R-DLZ

Dimming Remote

YL/RD

Red

Yellow/
Red

WH

BK

Black

Black

White

Line

120VAC

60Hz 

White

Load

Green

Ground

Green

Ground

Digital/Smart Dimmer

White

Red

Green

Black

1

2

3

Yellow/Red

4

5

DD00R-DLZ

Dimming Remote

Neutral to Terminal

Screw marked

White (WH)

2

3
5

WH

BK

YL/RD

4

1

Terminal

Screw

marked

Black

(BK)

Terminal

Screw

marked

Yellow/

Red

(YL/RD)

 

Step 4b

NOTE: DDS15, DW15S, DH15S, DZ15S and DL15S are compatible with DD0SR-DLZ.
NOTE: The Digital/Smart Switch must be installed in a wall box that has a Load 

connection. The DD0SR-DLZ switching remote must be installed in a wall box with a 

Line Hot connection and a Neutral connection.

WIRING DD0SR-DLZ SWITCHING REMOTE  

(wall box with Line Hot connection):

Connect wires per WIRING DIAGRAM as follows:

NOTE: "RD" terminal on switching remote is unused. Tighten screw.

NOTE: Use backwire connections when connecting two wires to one screw terminal.
•  Green or bare copper wire in wall box to Green terminal screw.

•  Line Hot (common) wall box wire identified (tagged) when removing old switch and  

First Traveler (note wire color) to remote terminal screw marked "BK".

•  Second Traveler wall box wire to remote terminal screw marked "YL/RD" (note wire 

color). This traveler from the remote must go to the terminal screw on the switch  

marked "YL/RD".

•  Neutral wall box wire to remote terminal screw marked "WH".

WIRING DIGITAL/SMART SWITCH (wall box with Load connection):

Connect wires per WIRING DIAGRAM as follows:

•  Green or bare copper wire in wall box to Green terminal screw.

•  Load wall box wire identified (tagged) when removing old switch to switch terminal 

screw marked "RD".

•  First Traveler (color noted above) to switch terminal screw marked "BK".

•  Remove Red insulating label from terminal screw marked "YL/RD".

•  Second Traveler wall box wire (color noted above) to switch terminal screw marked  

"YL/RD". This traveler from the switch must go to the terminal screw on the remote  

marked "YL/RD".

•  Proceed to Step 5.

Digital/Dimmer Switch

DD0SR-DLZ

Switching Remote

Terminal

Screw

marked

Black

(BK)

Terminal

Screw marked

Red (RD)

Terminal

Screw marked

White (WH)

Terminal

Screw

marked

Yellow/

Red

(YL/RD)

2

3
5

Neutral to Terminal

Screw marked

White (WH)

2

3
5

WH

BK

YL/RD

WH

BK

RD

YL/RD

1

4

4

1

Terminal

Screw

marked

Black

(BK)

Terminal

Screw

marked

Yellow/

Red

(YL/RD)

Hot (Black)

Neutral (White)

Load

YL/RD

YL/RD

RD

BK

Black

White

Line 

120/277VAC

60Hz

WH

BK

WH

DD0SR-DLZ

Switching Remote

Digital/Smart Switch

Green

Ground

Green

Ground

Summary of Contents for decora DD00R-DLZ









Reviews: