4-Way Wiring - Digital/Smart Dimmer with DD00R-DLZ Dimming Remotes Application:
NOTE: Installation must be compliant with dimmer load ratings.
4-Way Wiring - Digital/Smart Dimmer with DD0SR-DLZ Switching Remotes Application:
LIMITED 5 YEAR WARRANTY AND EXCLUSIONS
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and proper use for five years from the purchase date. Leviton’s only obligation is to correct such defects by repair or replacement, at its option. For details
visit www.leviton.com or call 1-800-824-3005. This warranty excludes and there is disclaimed liability for labor for removal of this product or reinstallation. This warranty is void if this product is installed improperly or in an improper environment, overloaded, misused, opened, abused, or altered in any manner, or is not used under normal operating conditions
or not in accordance with any labels or instructions. There are no other or implied warranties of any kind, including merchantability and fitness for a particular purpose, but if any implied warranty is required by the applicable jurisdiction, the duration of any such implied warranty, including merchantability and fitness for a particular purpose, is limited to
five years. Leviton is not liable for incidental, indirect, special, or consequential damages, including without limitation, damage to, or loss of use of, any equipment, lost sales or profits or delay or failure to perform this warranty obligation. The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
PK-A3123-10-00-2B
© 2019 Leviton Mfg. Co., Inc.
For additional information, contact Leviton’s Techline at 1-800-824-3005 or visit Leviton’s website at www.leviton.com
NOTE: Dress wires with a bend as shown in
diagram in order to relieve stress when mounting
device.
• Restore power at circuit breaker or fuse.
• See applicable operation section to ensure
dimmer or switch is functioning properly.
• If lights do not turn ON, refer to the
TROUBLESHOOTING section.
NOTE: Master dimmer or switch must also be installed.
Testing your Remote prior to completely mounting in wall box:
Step 5
• Position all wires to provide room in outlet wall box for device.
• Ensure that the word "TOP" is facing up on the device strap.
• Partially screw in mounting screws in wall box mounting holes.
Restore Power:
Restore power at circuit breaker or fuse. Installation is complete.
Remote Mounting:
TURN OFF POWER AT CIRCUIT BREAKER OR FUSE.
Step 6
Step 7
Installation may now be completed by tightening
mounting screws into wall box. Attach wallplate.
FOR CANADA ONLY
For warranty information and/or product returns, residents of Canada should contact Leviton in writing at Leviton Manufacturing of Canada
ULC to the attention of the Quality Assurance Department, 165 Hymus Blvd, Pointe-Claire (Quebec), Canada H9R 1E9 or by telephone
at 1-800-405-5320.
This device complies with Part 15 of the FCC Rules. Operation is subject to following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the
device. This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment OFF and ON, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving Antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/tv technician for help.
FCC CAUTION
Any changes or modifications not expressly approved by Leviton Manufacturing Co., Inc., could void the user's authority to operate the
equipment.
FCC COMPLIANCE STATEMENT
Copyright and Trademark Information
The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., used under license
by Leviton. Use herein of third party trademarks, service marks, trade names, brand names and/or product names are for
informational purposes only, are/may be the trademarks of their respective owners; such use is not meant to imply affiliation, sponsorship,
or endorsement. No part of this document may be reproduced, transmitted or transcribed without the express written permission of Leviton
Manufacturing Co., Inc.
DD00R-DLZ Dimming Remote
(3-way wall box from Step 2)
DD00R-DLZ Dimming Remote
(4-way wall box from Step 2)
Neutral to Terminal
Screw marked
White (WH)
2
3
5
WH
BK
YL/RD
4
1
Terminal
Screw
marked
Black
(BK)
Terminal
Screw
marked
Yellow/
Red
(YL/RD)
Neutral to Terminal
Screw marked
White (WH)
3
4
6
WH
BK
YL/RD
5
1
Terminal
Screw
marked
Black
(BK)
Terminal
Screw
marked
Yellow/
Red
(YL/RD)
2
Digital/Smart Dimmer
(3-way wall box from Step 2)
White
Red
Green
Black
1
2
3
Yellow/Red
4
5
Step 4c
Neutral (White)
Hot (Black)
Load
Digital/Smart Dimmer
DD00R-DLZ
Dimming Remote
DD00R-DLZ
Dimming Remote
YL/RD
YL/RD
Yellow/
Red
Red
WH
WH
BK
BK
Black
Black
White
Line
120VAC
60Hz
White
Green
Ground
Green
Ground
Green
Ground
NOTE: DDL06, DDMX1, DDE06, DD710, DW6HD, DW1KD, DH6HD, DH1KD, DZ6HD, DZ1KD, DL6HD and DL1KD are
compatible with DD00R-DLZ.
NOTE: The Digital/Smart Dimmer must be installed in a wall box that has a Load connection. The DD00R-DLZ dimming
remotes must be installed in a wall box with a Line Hot connection and a Neutral connection.
NOTE: Use backwire connections when connecting two wires to one screw terminal.
WIRING DD00R-DLZ DIMMING REMOTE (3-Way wall box with Line Hot connection):
Connect wires per WIRING DIAGRAM as follows:
• Green or bare copper wire in wall box to Green terminal screw.
• Line Hot (common) wall box wire identified (tagged) when removing old switch and First Traveler (note wire color) to
the terminal screw marked "BK".
• Second Traveler wire to remote terminal screw marked "YL/RD" (note wire color). This traveler from the remotes must
go to the terminal screw on the dimmer marked "YL/RD".
• Neutral wall box wire to remote terminal screw marked "WH".
WIRING DD00R-DLZ DIMMING REMOTE (4-Way wall box):
Connect wires per WIRING DIAGRAM as follows:
• Green or bare copper wire in wall box to Green terminal screw.
• First and Third Traveler wires to remote terminal screw marked "BK" (note wire color).
• Second and Fourth Traveler wires to remote terminal screw marked "YL/RD" (note wire color).This traveler from the
remotes must go to the Yellow/Red dimmer lead.
• Neutral wall box wire to remote terminal screw marked "WH".
WIRING DIGITAL/SMART DIMMER (3-Way wall box with Load connection):
Connect wires per WIRING DIAGRAM as follows:
• Green or bare copper wire in wall box to Green dimmer lead.
• Load wall box wire identified (tagged) when removing old switch to the Red dimmer lead.
• Third Traveler (color noted above) to the Black dimmer lead.
• Remove Red insulating label from the Yellow/Red dimmer lead.
• Fourth Traveler wire (color noted above) to the Yellow/Red dimmer lead. This traveler from the dimmer must go to the
terminal screw on the remotes marked "YL/RD".
• Neutral wall box wire to White dimmer lead.
• Proceed to Step 5.
Step 4d
DD0SR-DLZ Switching Remote
(3-way wall box from Step 2)
DD0SR-DLZ Switching Remote
(4-way wall box from Step 2)
Neutral to Terminal
Screw marked
White (WH)
2
3
5
WH
BK
YL/RD
4
1
Terminal
Screw
marked
Black
(BK)
Terminal
Screw
marked
Yellow/
Red
(YL/RD)
Neutral to Terminal
Screw marked
White (WH)
3
4
6
WH
BK
YL/RD
5
1
Terminal
Screw
marked
Black
(BK)
Terminal
Screw
marked
Yellow/
Red
(YL/RD)
2
Digital/Smart Switch
(3-way wall box from Step 2)
Terminal
Screw
marked
Black
(BK)
Terminal
Screw marked
Red (RD)
Terminal
Screw marked
White (WH)
Terminal
Screw
marked
Yellow/
Red
(YL/RD)
2
3
5
WH
BK
RD
YL/RD
1
4
Neutral (White)
Hot (Black)
Load
Digital/Smart Switch
DD0SR-DLZ
Switching Remote
DD0SR-DLZ
Switching Remote
YL/RD
YL/RD
YL/RD
RD
WH
WH
BK
BK
BK
Black
White
Line
120/277VAC
60Hz
WH
Green
Ground
Green
Ground
Green
Ground
NOTE: DW15S, DH15S, DZ15S and DL15S are compatible with DD0SR-DLZ.
NOTE: The DDS15 switch must be installed in a wall box that has a Load connection. The DD0SR-DLZ switching remotes
must be installed in a wall box with a Line Hot connection and a Neutral connection.
NOTE: "RD" terminal on switching remotes are unused. Tighten screws.
NOTE: Use backwire connections when connecting two wires to one screw terminal.
WIRING DD0SR-DLZ SWITCHING REMOTE (3-Way wall box with Line Hot connection):
Connect wires per WIRING DIAGRAM as follows:
• Green or bare copper wire in wall box to Green terminal screw.
• Line Hot (common) wall box wire identified (tagged) when removing old switch and First Traveler (note wire color)
to terminal screw marked "BK".
• Second Traveler wall box wire to remote terminal screw marked "YL/RD" (note wire color). This traveler from the
remote must go to the terminal screw on the switch marked "YL/RD".
• Neutral wall box wire to remote terminal screw marked "WH".
WIRING DD0SR-DLZ SWITCHING REMOTE (4-Way wall box):
Connect wires per WIRING DIAGRAM as follows:
• Green or bare copper wire in wall box to Green terminal screw.
• First and Third Traveler wires to remote terminal screw marked "BK" (note wire color).
• Second and Fourth Traveler wires to remote terminal screw marked "YL/RD" (note wire color). This traveler from
the remotes must go to the terminal screw on the switch marked "YL/RD".
• Neutral wall box wire to remote terminal screw marked "WH".
WIRING DIGITAL/SMART SWITCH (3-Way wall box with Load connection):
Connect wires per WIRING DIAGRAM as follows:
• Green or bare copper wire in wall box to Green terminal screw.
• Load wall box wire identified (tagged) when removing old switch to the terminal screw marked "RD".
• Third Traveler (color noted above) to the terminal screw marked "BK".
• Remove Red insulating label from the terminal screw marked "YL/RD".
• Fourth Traveler wire (color noted above) to the terminal screw marked "YL/RD". This traveler from the switch
must go to the terminal screw on the remote marked "YL/RD".
• Neutral wall box wire to the terminal screw marked "WH".
• Proceed to Step 5.
OPERATION
CLEANING: Clean with a damp cloth. DO NOT use chemical cleaners.
DD0SR-DLZ Switch Remote Operation:
NOTE: The lighting can be switched from either
the switch or the remote location.
Push Pad (Default settings)
Turn ON from OFF position:
Tap TOP of rocker – Lights turn ON.
Turn OFF from ON position:
Tap BOTTOM of rocker – Lights turn OFF.
Push Pad
Locator
Light
DD00R-DLZ Dimmer Remote Operation:
NOTE: The lights will turn ON at brightness set on
dimmer’s DIM/BRIGHT bar. The lighting can be
switched from either the dimmer or the remote location.
Push Pad (Default settings)
Turn ON from OFF position:
Tap TOP of rocker – Lights turn ON to
preset level.
Turn OFF from ON position:
Tap BOTTOM of rocker – Lights turn
OFF.
DIM/BRIGHT Bar
BRIGHTEN:
Press TOP half of DIM/BRIGHT Bar –
Lights brighten to desired level.
DIM:
Press BOTTOM half of DIM/BRIGHT
Bar – Lights dim to desired level.
If you continue to hold, the lights will
DIM to minimum level and then turn
OFF.
In the event of power outage or
interruption the lights will reset to the
last level when power is restored.
DIM/BRIGHT
Bar
Push Pad
Locator
Light
LED
Brightness
Display
NOTE: The locator light on these Matching Remotes will illuminate when the load is in the OFF position to facilitate
access in the dark.
• Lights Flickering
- Lamp has a bad connection.
- Wires not secured firmly under terminal screws of dimmer, switch and/or remote.
• Light does not turn ON and Locator LED does not turn ON
- Circuit breaker or fuse has tripped.
- Lamp is burned out.
- Lamp Neutral connection is not wired.
• Remote does not operate lights
- Ensure that total wire length does not exceed 300 ft (90 m).
- Ensure master dimmer or switch is installed properly.
TROUBLESHOOTING
This product is covered by U.S. Pat. Nos.: 7,683,755; 8,944,859 and corresponding foreign patents.