11
10
LEVITON
English
LEVITON
DAY/NIGHT BUTTON: When the thermostat is initially installed, the display will
show the
for your day temperature. By pressing the DAY/NIGHT button or
closing the CLK1 and CLK2 terminals on the back of the thermostat (installer
connected) you may select an alternate or night temperature. The thermostat
will remember this set point. Simply press the Day/Night button to alternate
between temperature settings.
CELSIUS/FAHRENHEIT: Simultaneously press buttons to switch between
°
F
and
°
C temperature display.
LIMITED OVERRIDE: When the keyboard is locked, ( switch #2 “ON”), the user
may override the temperature set point for 1 hour by pressing either or
buttons. The range of temperature override is +/- 3
°
F or
°
C from the
programmed daytime set point.
CLOCK TERMINALS (OPTION) CLK1 - CLK2: The thermostat is equipped with
Remote Clock Terminals. By connecting a remote clock/ timer the thermostat can
be alternated between the Day/Night set points automatically.
REMOTE SENSOR (OPTION) RS1 - RS2 - RS+V: The thermostat is designed to
accept the Electronic Remote Sensor which will allow you to locate your
thermostat In an area away from view.
POWER FAILURES: The thermostat employs the latest developments in solid state
electronic technology. Batteries are not required to maintain the selected set
points. In the event of a power loss, the thermostats memory will not be affected.
When power is restored, the thermostat will resume normal operation.
TEMPERATURE ACCURACY: Full temperature accuracy will only be realized after
the thermostat has been installed and powered for at least one hour.
USER CONTROLS
Cat. No. 6327-1
MODE: Select the desired mode of operation by repeatedly pressing the MODE
button.
: Controls cooling system only (the word “COOL” is displayed for 5 seconds).
: Controls heating system only (the word “HEAt” is displayed for 5 seconds).
: Controls both heating and cooling systems (Auto Change Over) (the word
“Auto” is displayed for 5 seconds).
OFF: Disables thermostat so equipment will not operate (the word “OFF” is
displayed). Avoid using the OFF mode during extremely cold weather to prevent
damage from freezing.
COOLING : Select the temperature you want your equipment to maintain while
in the cooling mode by pressing and holding the or buttons. The temperature
set point displayed for 5 seconds.
HEATING : Select the temperature you want your equipment to maintain while in
the heating mode by pressing and holding the or buttons. The temperature
set point is displayed for 5 seconds.
NOTE: The thermostat never allows less than 2
°
F difference between the heating
and cooling set points.
FAN
: The fan will come ON automatically when the system is operating,
but there is no Indication of this ON the display. To select continuous Fan
operation, press the FAN button . This is recommended for electronic air cleaners
or continuous ventilation requirements.
OUTDOOR (ODT) BUTTON: When the outdoor temperature sensor option is connected
to your thermostat, you can display the current outdoor temperature by pressing the
outdoor button. If the option is not connected, the thermostat will display
.
Untitled-4
11/30/00, 3:11 PM
10-11
