12
TECHNICAL DATA
Hedge trimmer
HT56 20V
Battery voltage
20 V
Cutting length
510 mm
Weight without battery/Charging equipment
1,9 kg
Noise details
Measured according to
1)
EN 60745;
2)
2000/14/ EG; Uncertainty K = 3 dB (A)
Sound pressure level L
pA
1)
80,2 dB (A)
Sound power level L
WA
2)
92 dB (A)
Vibration details
Total vibration values (triaxial vector sum) Determined properly EN 60745, Uncertainty K = 1,5 m/s
2
Vibration emission value a
h
<2,0 m/s
2
Recommended battery types
Typ LI 22 / BT20 20V
Recommended chargers
FC20 20V
Technical changes reserved.
WARNING: The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period.
The vibration emission level will vary because of the ways in which a power tool can be used and may increase above
the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down or when
it is running but not actually in use. This may significantly reduce the vibratory load over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work patterns.
SAFETY INSTRUCTIONS
General Power Tool Safety Warnings
WARNING
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term „power tool“ in the warnings refers to your
mains-operated (cordepower tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive atmos
-
pheres, such as in the presence of flammable li-
quids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose con-
trol.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (groundepower tools. Unmo-
dified plugs and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and refrigera-
tors. There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for car
-
rying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
f) If operating a power tool in a damp location is una
-
voidable, use a residual current device (RCprotected
supply. Use of an RCD reduces the risk of electric
shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
EN
ENGLISH
73711780_Hedge Trimmer_HT56_20V_LEVITA_DE_GB_CZ_SK_(19-10-10)_1-2.indd 12
10.10.19 12:52