27
E
N
GL
IS
H
BD-4603 ALB/ALS
18
EMC Guidance
•
This equipment needs to be installed and put into service in accordance with the information
provided in the user manual;
•
Wireless communications equipment such as wireless home network devices, mobile phones,
cordless telephones and their base stations, walkie-talkies can affect this equipment and should
be kept at least a distance d=3,3m away from the equipment.
(Note: As indicated in Table 6 of IEC 60601-1-2:2007 for ME EQUIPMENT, a typical cell phone with a
maximum output power of 2 W yields d=3, 3m at an IMMUNITY LEVEL of 3V/m)
19
Maintenance
•
Use a piece of cloth with water or mild cleansing agent to wipe the device and dry it immediately
with a dry cloth.
•
Do not use detergent or any strong chemicals to clean the device.
•
Use only a dry cloth to wipe the cuff.
•
If the device is not to be used for a long time, please remove the batteries from the device
(leaking of battery acid can cause the device to malfunction).
•
Do not twist the cuff.
•
Do not drop the product and avoid any strong impacts.
•
Do not attempt to disassemble or change any parts of the monitor, including arm cuff, due to
substitution of a component different from that supplied might result in measurement error.
•
Always store the unit in the pouch after use.
•
Do not place the device directly under sunlight, in high temperature, or in humid or dusty places.
•
Do not store the device in extremely low (less than -25°C) or high (more than 70°C) temperature.
20
Disposal (environmental protection)
Dispose of the device in accordance with EC Directive 2012/19/EU (Waste Electrical and
Electronic Equipment). If you have any queries, please contact your local body responsible
for waste disposal.
Batteries should be disposed of in an environmentally friendly manner in accordance with
local regulations.
21
Warranty
21.1
Warranty period
The devices have a 36-month warranty period. The warranty period starts on the day the new unit is
purchased. There is no warranty on Alkaline or rechargeable batteries (AA/AAA/LR03 type).
Consumables or defects causing a negligible effect on operation or value of the equipment are not
covered.
The warranty has to be proven by presentation of the original or copy of the purchase receipt, on which
the date of purchase and the unit-model are indicated.
21.2
Warranty handling
A faulty unit needs to be returned to an authorized service centre including a valid purchase note and
a filled in service return card.
If the unit develops a fault during the warranty period, the service centre will repair any defects caused
by material or manufacturing faults free of charge, by either repairing or exchanging the faulty units or
parts of the faulty units. In case of replacement, colour and model can be different from the original
purchased unit.
The initial purchase date shall determine the start of the warranty period. The warranty period is not
extended if the unit is exchanged or repaired by the service centre.
Summary of Contents for BD-4603 ALB
