LevelOne WUS-3200, User Manual

Page: 71 / 105

68
TCP/IP: You have to set the server’s TCP/IP configuration to connect
TCP/IP network. Please see Chapter 3 Basic Installation for more
details.
Supported Protocols: The server supports the following TCP/IP
protocols:
TCP/IP
Enable LPR (Line Printer Remote) Printing: select or clear
Enable LPR Printing support. It is enabled in Factory
Default.
Enable IPP Printing: select or clear Enable IPP Printing
support. It is enabled in Factory Default.
Enable Raw TCP Printing : select or clear Enable Raw TCP
Printing support. It is enabled in Factory Default and users
may set the protocol’s TCP ports as following boxes:
-
TCP Port 1: set TCP port for the printer of USB1 port
(default: 9100)
-
TCP Port 2 : set TCP port for the printer of USB2 port
(default: 9101)
Enable SMB/CIFS Print/File Server: select or clear Enable
SMB/CIFS Print/File Server support. It is enabled in
Factory Default.
-
Enable Internet Access: select or clear Enable Internet
Access support. If you clear the item, you do not allow that
users can access your SMB/CIFS server via Internet. If you
select the item, you allow Internet users can access your
storage using the SMB/CIFS protocol.
-
Enable Server Authentication: select or clear Enable
Server Authentication support. Select the item, if you
want to share your storage or printer with user level
security which requires user name and password to login.
If you clear the item, your storage will be shared without
security.
Enable FTP Server: select or clear Enable FTP Server
support. It is enabled in Factory Default and users may set
some parameters as follows:
-
FTP Port: type an integer number to set FTP server’s TCP