80
WEP + Use 802.1x Authentication
WEP aims to provide security by encrypting data over radio
waves so that it is protected as it is transmitted from one end
point to another. However, it has been found that WEP is not as
secure as once believed.
1. From the
Encryption
drop-down list, select
WEP
setting.
2. Check the option of
Use 802.1x Authentication.
3. Click on the ratio of
WEP 64bits
or
WEP 128bits
.
4. Enter the
Port
,
IP Address
and
Password
of RADIUS
Server:
5. Click
Save & Apply
button.
6. Change setting successfully! Do not turn off or reboot the
Device during this time. Please wait 20 seconds ...
Summary of Contents for WRE-8011E
