40
7
Getting Started with the Web pages
The Portable Repeater includes a series of Web pages that
provide an interface to the software installed on the device. It
enables you to configure the device settings to meet the needs
of your network. You can access it through your web browser
from any PC connected to the device via
the LAN ports.
Accessing the Web pages
To access the Web pages, you need the following:
A PC or laptop connected to the LAN port on the device.
A web browser installed on the PC. The minimum browser
version requirement is Internet Explorer v4 or Netscape v4.
For the best display quality, use latest version of Internet
Explorer, Netscape or Mozilla Fire fox. From any of the LAN
computers, launch your web browser, type the following
URL in the web address (or location) box, and press [Enter]
on your keyboard:
http://repeater.nw
The Quick Setup homepage for the web pages is displayed:
Figure 2:
Homepage
1. You are now ready to configure your device.
This is the first page displayed each time you log in to the Web
pages.
Note
If you receive an error message or the Welcome page is not
displayed, see Troubleshooting Suggestions.
Summary of Contents for WRE-8011E
