Wireless setting, 802.1X setting and WDS
Wireless settings allow you to set the wireless configuration items.
Wireless: The user can enable or disable wireless function.
Network ID (SSID): Network ID is used for identifying the Wireless LAN (WLAN). Client stations can
roam freely over this product and other Access Points that have the same Network ID. (The factory
setting is “default”)
SSID Broadcast: The router will Broadcast beacons that have some information, including SSID so
that the wireless clients can know how many AP devices by scanning function in the network.
Therefore, this function is disabled; the wireless clients can not find the device from beacons.
Channel: The radio channel number. The permissible channels depend on the Regulatory Domain.
The factory setting is as follow: channel 6 for North America; channel 7 for European (ETSI); channel
7 for Japan.
Summary of Contents for WBR-6001
