LevelOne WAB-2000 User Manual Download Page 50

Page: 50 / 77

WAB–2000 Wireless Access Point

Chapter 3: Access Point Configuration

29000156-001 A

WAB–2000 Wireless Access Point

Chapter 3: Access Point Configuration

29000156-001 A

DHCP Client List

The

Monitoring/Report — DHCP Client List

screen displays all

clients currently connected to the WAB–2000 via DHCP server, including

their hostnames, IP addresses, and MAC Addresses.

The DHCP Client list constantly collects entries. To remove entries

from the list, check mark the

Revoke Entry

selection and click

Remove

confirm the action.

System Log

The

Monitoring/Report — System Log

screen displays system facil-

ity messages with date and time stamp. These are messages documenting

functions performed internal to the system, based on the system’s func-

tionality. Generally, the Administrator would only use this information if

trained as or working with a field engineer or as information provided to

technical support.

The System log continues to accumulate listings. If you wish to clear

listings manually, use the

Clear

button.

Summary of Contents for WAB-2000














































































Search results

Summary of Contents for WAB-2000

Reviews:

Related manuals for WAB-2000

Brands by name

Popular brands

LevelOne WAB-2000, User Manual

Search results

Summary of Contents for WAB-2000

Reviews:

Related manuals for WAB-2000

Brands by name

Popular brands