WAB–2000 Wireless Access Point
Chapter 3: Access Point Configuration
34
29000156-001 A
WAB–2000 Wireless Access Point
Chapter 3: Access Point Configuration
29000156-001 A
35
Rogue AP Detection
The
Wireless Access Point — Rogue AP Detection
screen allows the
network administrator to set up rogue AP detection. Enable rogue AP
detection and enter the MAC Address of each AP in the network that you
want the AP being configured to accept as a trusted AP. (You may add
up to 20 APs.) Enter an email address for notification of any rogue or
non-trusted APs. (The MAC Address for the WAB–2000 is located on the
System Configuration — General
screen. You can also select the follow-
ing filter options.
•
SSID FIlter
: Check the SSID option to only send rogue APs that
match the AP's SSID or wireless bridge's SSID.
•
Channel Filter
: Check the channel filter option to only send rogue
APs that match the AP's channel or the wireless bridge's channel.
• If both options are checked, only APs that match both the SSID
and channel are sent.
The
Adjacent AP list
, under
Monitoring/Reports
on the navigation
menu, will detail any marauding APs.
