Product Diagram
English
Hardware Installation
Step 1: Connection to Power over Ethernet Switch
A. Connect one of the Ethernet Switch port with PoE power supply to the
PoE IN
port of
POR-0101/0103 as the following connection.
B.
The LED indicators “
POWER”
and
“
PoE
IN”
will turn on indicating the PoE and Ethernet
connection.
C.
The LED indicators “
PoE IN
” will flash to indicate Ethernet data activity.
Step 2: Connection to PoE PD
D.
Connect the“
PoE OUT”
port of POR-0101/0103 to power up the PD device as the following
connection.
E. The LED indicator
s “
PoE OUT
”
will turn on indicating the PoE and Ethernet connection.
F.
The LED indicators “
PoE OUT
” will flash to indicate Ethernet data activity.
** Note: If the Ethernet cable is not standard CAT5 cable, the POR-0101/0103 may be working for
shorter length than 100 meter.