The Mac version of the KVM switcher software supports only Mac OS 10.4 (Tiger) and
later. Earlier version of the Mac OS might or might not work well with it.
The KVM Switcher Software supports both the Windows and the Mac OS operating
systems. For other OS platforms such as Linux , you can still use the universal
keyboard hotkey -
ScrLk + ScrLK
- to switch computer. However, this switching hotkey
is not available on non-computer platform such as Mac OS.
Step 3
. Connect a set of the fixed KVM/Audio&Mic cables to a computer’s connectors.
Connect another set of cables to another computer. Now you can operate the KVM
Switch immediately.
Some older computers with USB interface might need to manually enable the USB option
in the BIOS settings before you can use any USB devices. If your USB interface does not
work, please check the USB option status in the BIOS.
If you has not yet installed a USB mouse on your computer, there might be an error
message telling you that mouse is not detected and prompting you to decide whether to
ignore the same message in the future, and yet you found there is no mouse movement
to disable this message….So it is suggested that you should installed your USB mouse
on your computer first, before connecting it to this KVM Switch.
