LevelOne GTL-2690, Installation Manual

Page: 22 / 76

Introduction
1-4
1
Figure 1-3 Port LEDs
Figure 1-4 System LEDs
Table 1-1 Port Status LEDs
LED Condition Status
Link/
Activity/
Speed

On/Flashing Amber Port has a valid link at 10 or 100 Mbps. Flashing indicates activity.
On/Flashing Green Port has a valid link at 1000 Mbps. Flashing indicates activity.
Off
The link is down.
Table 1-2 System Status LEDs
LED Condition Status
Power Green Internal power is operating normally.
Amber Internal power supply failure.
Off Power off or failure.
Diag Flashing Green System self-diagnostic test in progress.
Green System self-diagnostic test successfully completed.
Amber System self-diagnostic test has detected a fault.
RPS Green Redundant power supply is receiving power.
Amber Fault in redundant power supply, including thermal or fan failure.
Off Redundant power supply is off or not plugged in.
Port Status LEDs
1 2 3 4 5 6 7 8 9 10 11 12 13 1 4 15
2 4
Stack
M aster Power
M odule Diag
Stack
Link
Stack I D
RPU
M aster
Select
Console
Stack I D
Power
Stack
M aster
Stack
Link
RPS
Diag M odule
2 4
System Status LEDs