LevelOne GSW-2692, Installation Manual

Page: 31 / 64

Mounting
3-5
3
Desktop or Shelf Mounting
1. Attach the four adhesive feet to the bottom of the first switch.
Figure 3-4 Attaching the Adhesive Feet
2. Set the device on a flat surface near an AC power source, making sure there
are at least two inches of space on all sides for proper air flow.
3. If installing a single switch only, go to “Connecting to a Power Source” at the
end of this chapter.
4. If installing multiple switches, attach four adhesive feet to each one. Place each
device squarely on top of the one below, in any order.
5. If also installing RPUs, place them close to the stack.
Slave
Stack
Master
Uplink Uplink
PWR
Diag
RPU
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
27/Down
28/Up
25
26
o n e
level ®
GS
W-2
69
2