5. Configure Link-aggregation Port
This section will descirbls how to configure Link-aggregation Port based on the Ruijie equipment
。
5.1. Summarize
5.1.1.
Understand Link-aggregation Port
We can bind many physical links into a logistical links
，
We call this logistical links Link-aggregation
Port
（
AP
）。
AP offered by Ruijie compliant with IEEE802.3
，
It can be used to enlarge the link
barndwidth to provide higher connection reliability
。
AP supports flow balance, it can assign flow to each link evenly. AP realize the linke backup.When
one of the link in the AP disconnected
，
syestem will assign this link’s flow to the other effective links
automaticly
。
One broadcast or more broadcasts received by one link in the AP will not be transmitted
to other links.
Typical
AP
configuration.
Tip
When Flow balance mode is configured as source IP,destination IP,
Source IP+destination IP, it should balance the flow by using the
equipment’s default mode to 2 layer packets. Default model can be
gotten by Command
“show link-aggregation group
AP_id”
when
the equipment has not been configured
link-aggregation
load-balance.
