background image

 

 

32

LevelOne NAS - Maintenance 

The LevelOne NAS has been specially designed to run on 24 hours, 7 days a week and to be 
ready at all times. It is also robust to protect against system crashes caused by power loss. 
This section provides a general maintenance overview. 

Shutdown/Restart the Server

 

Please use the following steps to shutdown/restart the server: 

1.

 

Ask all the connected users to save their working files and stop using the LevelOne 
NAS.  

2.

 

Open the administration web page and go to 

System Tools · Restart/Shutdown

. Follow 

the instructions to restart or shutdown the system. 

Reset the Administrator Password & Network Settings 

If you accidentally forget the administrator password, you will not be able to perform any 
administration work on the LevelOne NAS. Under this condition, you can reset the 
administrator password and network configuration to the factory default. 

1.

 

Use the tip of a ball point pen and depress the configuration reset switch located on 
the back of the LevelOne NAS.  Hold it for about 5 seconds until the beep. 

2.

 

The network configuration will be reset, and you may need to re-configure some or 
all of the network settings before you can connect to the LevelOne NAS. 

3.

 

Use a web browser to connect to the LevelOne NAS. Enter the 

System 

Administration

 and enter the following login name and password. 

 
 

 

Login:   

 

Administrator 

 

 Password: 

 

 

 admin

 

 
You can then perform system administration. 

 

Note

:  If the configuration reset switch is disabled in the 

System Tools 

· 

Hardware 

Settings

 page, you are no longer able to use this function.  Please remember 

your administrator password. 

Disk Failure or Malfunction 

If you are suffering from a disk failure or malfunction, please do the following: 

1.

 

Log all abnormal events or messages for technician’s reference. 

2.

 

Stop all operations of the LevelOne NAS and power it off. 

3.

 

Contact the customer service for technical support. 

Chapter 5

 

Summary of Contents for FNS-5000











































Reviews: