background image

 

 

10

Administration of the LevelOne NAS 

Once you have installed the LevelOne NAS and other hardware and connected it to the 
networks, you can use your browser (supports Microsoft Internet Explorer 5.0 or later and 
Netscape Navigator 4.5 or later; Microsoft Internet Explorer 5.5 is recommended) to 
complete administrative tasks for the LevelOne NAS. 

Accessing the Administration Page 

The following methods allows administrator to access the Administration page: 

1.

 

Launch your web browser (Microsoft Internet Explorer version 5.5 is recommended).  If 

you know the IP address of the LevelOne NAS, type the IP address in the address bar of 
the browser and press “Enter”.  The IP address can also be obtained on the LCD display 
of the LevelOne NAS (see Appendix A). 

 

2.

 

Use the Quick Installation Wizard (see Appendix C) and double-click on LevelOne NAS 
in the list which appears. When the browser displays the home page of your LevelOne 
NAS, click on the 

Administration

 link. 

 

Enter the user name and password to continue the administration setup. 

Chapter 3

 

Summary of Contents for FNS-5000











































Reviews: